UP | ULTIMAPEAK
YOUR FIRST ORDER
Join the UltimaPeak list and get 10% off your first order. Product updates, field notes and smarter ultralight gear — no noise.
By signing up, you agree to receive UltimaPeak marketing emails. See our Privacy Policy.
PRODUCT GUIDE
Everything you need to set up, use and understand AeroDry.
8 G
INCLUDING TITANIUM STAKE
4
ADJUSTABLE HANGING LINES
TREKKING-POLE TENTS
BUILT FOR THE VESTIBULE
DESIGNED & MANUFACTURED IN SWEDEN
Engineered and made in Sweden.
Hang wet gear inside your tent vestibule while keeping your sleeping area organized and dry.
Elevate wet gear above the ground to improve airflow and create better drying conditions.
Keep wet socks, gloves and insoles away from your sleeping area and the tent floor.
ADJUSTABLE HANGING LINES
Four individually adjustable lines let you organize socks, gloves and other small items at different heights.
LOWER INSOLE CLIP
The integrated lower clip is designed for insoles and other small items that benefit from additional airflow.
Use the integrated top hook and loop to attach AeroDry securely around the upper end of your trekking pole.
Extend the main line toward the ground and secure it with the included titanium stake. Pull the line taut to create a stable vertical setup.
Slide each hanging line to the desired height, then attach socks, gloves or other small items to the hooks.
Use the lower clip for insoles or other items that benefit from additional airflow.
Everything you need to know about choosing, using and caring for AeroDry
AeroDry is designed primarily for trekking-pole tents where the pole forms part of the vestibule structure.
The system attaches near the top of the trekking pole and is tensioned toward the ground using the included titanium stake. Compatibility depends on the position of the pole, the vestibule layout and the available space for tensioning the main line.
AeroDry is designed to be used with a trekking pole, which provides the upper attachment point for the system.
It may also work with another secure attachment point, but the system must be positioned vertically and tensioned safely toward the ground. Always make sure the attachment point is stable before hanging any gear.
Yes. Two AeroDry systems can be installed in parallel to increase the available drying capacity.
This is particularly useful in tents with two trekking poles or separate vestibules, allowing wet equipment to be distributed between both sides of the tent.
Yes. Each of the four hanging lines can be moved individually along the main line.
This allows you to position different items at suitable heights, create more space between wet garments and adapt the setup to the available space inside your vestibule.
AeroDry is designed for lightweight trail equipment such as socks, gloves, insoles, gaiters, small clothing items and other accessories that need to dry or air out.
The lower clip is particularly useful for insoles and other small items. AeroDry is not intended for heavy equipment such as boots, backpacks or water-filled garments.
Rinse or wipe the lines and components with clean water when necessary. Allow the entire system to air-dry completely before packing it away.
Coil the lines loosely to help prevent tangles and store AeroDry in a dry place. Wipe dirt and moisture from the titanium stake before storage. Do not use bleach, solvents or strong cleaning products.
AeroDry is designed and manufactured by UltimaPeak in Umeå, Sweden.
Each system is assembled by hand with careful attention to weight, function and durability.
Approved product images, descriptions, technical data and brand assets for UltimaPeak retailers.
