UP | ULTIMAPEAK
YOUR FIRST ORDER
Join the UltimaPeak list and get 10% off your first order. Product updates, field notes and smarter ultralight gear — no noise.
By signing up, you agree to receive UltimaPeak marketing emails. See our Privacy Policy.
Product guide
Everything you need to choose, use and understand MagFeets.
3.8–4.8 G
Ultralight support for your stove system.
PETG-CF
Carbon-fibre reinforced material built for the outdoors.
3 PER SET
Everything you need for a stable setup.
DESIGNED & MANUFACTURED IN SWEDEN
Engineered and made in Sweden.
Creates a wider support base for improved stability on uneven ground.
Lifts the gas canister slightly off the bottom of your cookware, reducing direct contact and helping prevent rust marks during storage.
Keeps the nested gas canister centered inside compatible 95 mm cookware, reducing movement and noise while packed.
BOTH SIZES FIT SMALL AND LARGE THREADED GAS CANISTERS.
3.8 G
THE LIGHTEST OPTION
Stable support with the lowest possible weight. Ideal when every fraction of a gram matters.
4.8 G
A WIDER, MORE STABLE BASE
The wider stance adds stability when using larger cookware and gas canisters.
Attach each MagFeet to the lower rim of the gas canister in three simple steps.
Hold the MagFeet at a downward angle with the hooked end facing the canister's lower rim.
Position the notched opening around the metal rim at the bottom of the gas canister.
Push upward until the MagFeet is fully seated and the support extends outward toward the ground.
Always align the notched section with the canister's lower rim. Do not install MagFeets in the opposite direction.
MagFeets Small and Large are designed for standard EN417 threaded gas canisters in 100 g, 230 g and 450 g sizes. Both versions fit all three canister sizes; the difference is the width of the support footprint and total weight.
MagFeets are precision 3D-printed from carbon-fibre reinforced PETG (PETG-CF). Each set is designed and manufactured in Sweden. Minor variations in surface texture and weight can occur as a natural result of the production process and colour.
Inspect each MagFeet before use and do not use damaged or cracked parts. Always install the notched section correctly around the gas canister's lower rim. Use the stove on a stable surface, keep MagFeets away from direct flame and allow the canister and cookware to dry before nesting them for storage.
Download the complete MagFeets technical data sheet for specifications, compatibility and retailer information.
Everything you need to know about choosing, using and caring for MagFeets.
MagFeets are designed for standard EN417 threaded gas canisters in 100 g, 230 g and 450 g sizes. Both MagFeets Small and Large fit all three canister sizes.
Choose Small when minimum weight is the priority. A set weighs 3.8 g. Choose Large for a wider support footprint and increased stability with larger cookware and gas canisters. A Large set weighs 4.7 g, only 0.9 g more than Small.
Hold each MagFeet at a downward angle, place the hooked opening around the gas canister's lower metal rim and push upward until it is fully seated. The long support end should extend outward toward the ground.
Yes. MagFeets are designed to remain attached to the lower rim while the stove is in use. Always check that all three feet are correctly installed, place the stove on a stable surface and keep MagFeets away from direct flame.
MagFeets are made from PETG-CF and positioned at the base of the gas canister, away from normal burner heat. Do not expose them to direct flame or excessive heat, and stop using any part that shows signs of damage or deformation.
When the gas canister is nested inside compatible cookware, MagFeets lift it slightly from the bottom and keep it centered. This reduces direct metal-to-metal contact, trapped moisture, movement and noise while packed.
Wipe them clean with a damp cloth and allow them to dry completely before storage. Make sure the gas canister and cookware are also dry before nesting them together.
Do not continue using a cracked, deformed or damaged MagFeet. Contact UltimaPeak and include a photo of the part together with information about the gas canister and cookware used.
Approved product images, descriptions, technical data and brand assets for UltimaPeak retailers.
